Powervalve TMEES

How to reset the TMEES Servo system on the 2015-2021 125-144cc / 2015-2018 250-300cc models  ?

Each time you disconnect the servo cables , or a servo cable brakes – you need to reset the servo.
 
We have posted 3 short videos to show how it’s done …
 
for the 125/144cc you need the reset cable with parts nr: 68193
for the 250/300cc you need the reset cable with parts nr: 68192
 
on the 125/144 connect the reset cable to the plug of the capacitor (the capacitor needs to get disconnected first)
on the 250/300 there is a special plug on the left side of the bike in the wiring (remove the red cap and connect the servo reset cable)
 
connect the reset cable to a 12V battery
after 5-10 sec the servo will open and close
 
the reset is now complete
 
on the 125/144 … don’t forget to re-connect the capacitor
 
Download here the technical sheet
 

How to reset the TMEES Servo system on the 2019-..... 250/300cc models (MX/SMX) ?

 

How to reset the TMEES Servo system on the TSi (Two-Stroke Fuel Injection)

U maakt gebruik van een verouderde versie van
Internet Explorer, klik hier om deze te updaten.
x